10 - 2
Show Data Format
Scan the bar code below to show current data format settings.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The pro-
gramming function will still occur, but in addition, the content of that program-
ming code is output to the terminal.
Note: This feature should not be used during normal scanner operation.
TotalFreedom
TotalFreedom is an open system architecture that makes it possible for you cre-
ate applications that reside on your scanner. Three types of appls can be cre-
ated using TotalFreedom: Image Processing, Decoding, and Data Formatting.
For further information about TotalFreedom, go to our website at
www.honeywellaidc.com.
Data Format Settings
DFMBK3?.
To Next Page
Loading...
Need help?
General
