1 - 1
1
Getting Started
Introduction
The 5X10/80 series of products is designed for integration into a wide range of
OEM devices. The engine’s compact mechanical design can drop into many
existing applications, allowing OEMs and third-party manufacturers to integrate
the benefits of image-based scanning into a variety of devices, including
handheld computers (PDTs), medical instrumentation, diagnostic equipment,
and robotics.
Two different decoding configurations provide OEMs the flexibility required to
address various application-specific needs. The 5X10, with linear and PDF417
decoding, delivers "laser-like" reading on linear codes, and point-and-shoot on
stacked codes. The 5X80 full-featured decoder incorporates Honeywell
comprehensive list of decoding capabilities. A Software Developers Kit provides
a simple software interface (APIs) to help ease integration. For software updates
and additional information, visit the Honeywell website at
www.honeywellaidc.com.
About This Manual
This User’s Guide provides demonstration, installation, and programming
instructions for the engine. Product specifications, dimensions, warranty, and
customer support information are also included.
Honeywell’s bar code engines are factory programmed for the most common
terminal and communications settings. If you need to change these settings,
programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking the Engine
After you open the shipping carton containing the OEM Engine, take the
following steps:
• Check to make sure everything you ordered is present.
• Save the shipping container for later storage or shipping.
• Check for damage during shipment. Report damage immediately to the
carrier who delivered the carton.
To Next Page
Loading...
Need help?
General
