Chapter 6 — Configure the Computer
68 Dolphin CT50 Mobile Computer User Guide
Configure Bluetooth Settings
You configure Bluetooth settings in the Settings app.
1 Start the Settings app and tap Bluetooth.
2 Tap the Menu icon and select a setting from the menu:
• Tap Rename phone to change the computer device name. Type
the new name and then tap Rename.
• Tap Visibility timeout to set the amount of time that the
computer is visible to other Bluetooth devices. By default, the
timeout is set to 2 minutes. You can select 5 minutes, one hour, or
no timeout. Setting a shorter timeout value preserves battery life.
• Tap Show received files to view statistics on the received files.
Making the CT50 Discoverable
By default, the CT50 is not discoverable, which means that the computer
will not be found by other Bluetooth devices.
1 Tap All Apps > Settings.
2 Verify the Bluetooth radio is activated.
3 Tap Bluetooth.
4 Tap CT50 (the default computer name) at the top of the screen to
make the device discoverable. The computer starts a 2 minute count
down during which time the computer is temporarily discoverable by
other devices using Bluetooth technology.
Rename or Disconnect a Paired Device
You can rename or disconnect a paired Bluetooth device from the
Settings app.
1 Open the Settings app and tap Bluetooth.
2 Tap the Settings icon in the Paired Devices list.
3 To rename the device, tap Rename, type the new name, and then tap
OK.
• To disconnect the device, tap Unpair.
To Next Page
Loading...
Need help?
General
