Performance Series IP Camera Software Configuration Guide
20
5 Configuring Camera Settings
This chapter contains the following sections:
• Configuring Camera Properties, page 20
• Configuring Video Settings, page 27
• Configuring Audio Settings, page 31
Configuring Camera Properties
Go to Setup Camera Setup Properties.
This section describes how to configure camera properties (picture, exposure, lighting
compensation, white balance, day and night, IR light, etc.).
Properties
Go to Setup Camera Setup Properties Properties.
On the Properties tab, you can view camera property information. The configurations become
valid immediately after they are saved.
Note
The settings that are available on the Properties tab may differ
depending on the selections made in the Profile Management
setup (see Profile Management on page 24 for more information).
To Next Page
Loading...
Need help?
General
