Honeywell H4W2PER2 User Manual

Configuring Network Settings
33
6 Configuring Network Settings
This chapter contains the following sections:
• Configuring TCP/IP Settings, page 33
• Configuring Port Settings, page 35
• Configuring PPPoE Settings, page 36
• Configuring SMTP (Email) Settings, page 37
• Configuring UPnP Settings, page 38
• Configuring SNMP Settings, page 39
• Configuring Bonjour Settings, page 41
• Configuring Multicast Settings, page 41
• Configuring IEEE802.1X Settings, page 42
• Configuring QoS Settings, page 43
• Configuring Certificate Settings, page 43
Configuring TCP/IP Settings
Go to Setup Network Setup  TCP/IP.
Figure 6-1 TCP/IP
Table 6-1 TCP/IP Configurations
Parameter Function
Hostname
Configure to set the current host camera’s name.

Honeywell H4W2PER2 Specifications

General

Brand	Honeywell
Model	H4W2PER2
Category	Security Camera
Language	English