Honeywell Notifier IDR-2P User Manual

IDR-2P, -2A & -6A Repeaters User Manual
Operation
23 997-411-000-9, Issue 9
March 2008
4.3.4 Edit NORMAL Message (-2A)
This option lets you change the message that
is displayed on the lower line of the LCD when
the system status is normal.
1 Use the and pushbuttons to select
the character to be edited - it blinks. Use
the and pushbuttons to scroll through
the available character set until the required
replacement character is displayed. Select
the next character to be edited, and so on.
2 When all edits are complete, press to
exit from the message editor.
Note: To exit from the message editor without
saving changes, do not press .
Instead, turn the keyswitch to return to
access level 1.
4.3.5 Restore NORMAL Message (-2A)
To use the repeater’s default message instead
of the message edited at the repeater, select
this menu option and press .
4.3.6 Language (-2A)
Use the and pushbuttons to scroll
through the available languages. Press to
select the language currently-displayed.
DEFAULT NORMAL MESSAGE IS USED
REPEATER DISPLAYS ARE IN SELECTED
LANGUAGE

Honeywell Notifier IDR-2P Specifications

General

Brand	Honeywell
Model	Notifier IDR-2P
Category	Repeater
Language	English