Honeywell Notifier IDR-2P User Manual

IDR-2P, -2A & -6A Repeaters User Manual
Contents
ii997-411-000-9, Issue 9
March 2008
Contents
1 Introduction 1
1.1 CE Marking 2
1.2 System Design and Planning 2
1.3 General 2
1.4 Related Documents 3
1.5 Warnings and Cautions 3
1.6 Tips 3
2 Installation Guide 4
2.1 Pre-Installation Check List 4
2.1.1 Some DO’s and DON’T’s 4
2.2 Transient Protection 5
2.3 Installation 6
2.3.1 Checking Your Repeater for Damage 6
2.3.2 What to do if Your Repeater is
Damaged or Suspect 7
2.4 Installation Options 8
2.5 Installing the Enclosure 9
2.5.1 Fixing Enclosure to Wall 9
2.5.2 Fitting the Label Inserts 10
2.6 Isolated RS232 Board (option) 11
2.7 Bezel Kit (option) 12
2.8 Installing the Wiring 13
2.8.1 External Wiring Connections 13
2.8.2 RS485 Serial Network - Address
Switches and Termination Resistors 14
2.8.3 ID
2
net Network via RS232 - Address
Switches 15
3 Commissioning 16
3.1 Preliminary Checks 16
3.2 Powering the Repeater 17
3.3 Passive Repeaters 17
4 Operation 18
4.1 Controls and Indicators 18
4.2 Menus - General Information 20
4.3 Menus: -2A/-2P (Except ID50) 21
4.3.1 Lamp Test (-2A) 21

Honeywell Notifier IDR-2P Specifications

General

Brand	Honeywell
Model	Notifier IDR-2P
Category	Repeater
Language	English