IDR-2P, -2A & -6A Repeaters User Manual
Introduction
1 997-411-000-9, Issue 9
March 2008
1 Introduction
This manual provides the user with all
necessary instructions for the installation,
commissioning and operation of an IDR
repeater.
There are three variants of the IDR repeater:
a. IDR-2P passive repeater, with a 2 line x 40
character LCD.
b. IDR-2A active repeater, with a 2 line x 40
character LCD.
c. IDR-6A active repeater, with a 6 line x 40
character LCD.
Procedures described in this manual include
appropriate warnings and cautions to guide the
user towards adopting safe and methodical
work practices during the installation,
commissioning and operational phases.
Important Note
This manual must be read, and its content
clearly understood, before proceeding with
any work relating to the IDR repeater.
Damage to the repeater and/or the fire
control panel(s) may result from NOT
following the recommended procedures
described in this manual.
If there are any areas of doubt, consult your
supplier before continuing with the system
installation or commissioning.
IDR-2P
IDR-2A
IDR-6A
To Next Page
Loading...
Need help?
General
