Honeywell Performance H4D3PRV3 User Manual

www.honeywell.com/security
44 | Performance Series IP Camera Software Configuration Guide
Creating a Video Clip
You can clip and save a section of recorded video during video playback using the clip function.
Note Creating a video clip is currently only supported for HBD3PR2/H4D3PRV2
cameras.
Figure 4-8 Clip Function Controls
Note Playback of recorded video is automatically paused during clipping.
1. Find the recording that you want to create a clip from.
2. On the timeline, click the recording at the time you want to start the clip, and then click
. This designates the start time of the clip.
3. Next, click the recording at the time you want to end the clip, and then click . This
designates the end time of the clip.
4. Click to save the clipped file to your local PC. To configure the saving path, see Path
on page 71.
Viewing Snapshots
Note Viewing snapshots is currently only supported for HBD3PR2/H4D3PRV2
cameras.

Honeywell Performance H4D3PRV3 Specifications

General

Brand	Honeywell
Model	Performance H4D3PRV3
Category	Security Camera
Language	English