Honeywell Performance H4D3PRV3 User Manual

www.honeywell.com/security
80 | Performance Series IP Camera Software Configuration Guide
Figure 5-35 Modify Group Interface
In the Modify Group Interface, you can edit Remarks and Rights.
Restoring Default Settings
Click Default to restore the camera to its factory default settings.
Figure 5-36 Default Interface
Note The system cannot reset some information, such as the network IP address.

Honeywell Performance H4D3PRV3 Specifications

General

Model	H4D3PRV3
Series	Performance
Night Vision	Yes
Power Source	PoE (Power over Ethernet)
Two-Way Audio	No
Motion Detection	Yes
Smart Home Compatibility	No
Resolution	1080p
Storage	MicroSD card