Honeywell Performance H4D3PRV3 User Manual

Configuring Camera Settings | 73
800-21358 - A - 10/2015
Figure 5-25 FTP Configuration Interface
Table 5-16 FTP Configurations
Parameter Function
Server Address Set the IP address of the server.
Port The default setting is 21. You can modify this setting as necessary.
User Name Enter the server user name.
Password Enter the server password.
Remote Directory Set storage directory where recorded video and snapshots will be
stored.
Emergency (Local) Enable Emergency (Local) to save to the local Micro SD card when the
network connection to FTP is unavailable.

Honeywell Performance H4D3PRV3 Specifications

General

Brand	Honeywell
Model	Performance H4D3PRV3
Category	Security Camera
Language	English