Honeywell XLS-REL User Manual

Programming the XLS-REL
2.14 XLS-REL Technical Reference Manual
System testing
Warning! Disconnect the release circuit until system testing is
complete and the system is stable.
Testing XLS100 systems
Allow the system sufficient time to stabilize after the initial
startup or download. Before you test the system, access the SDC
Status tool in the XLS100-SDU. Do not test the system if the
status LEDs indicate anything pending or in progress. This
includes:
•Mapping
• Device new starts
• Resets
•Restarts
Testing XLS1000 systems
Allow the system sufficient time to stabilize after the initial
startup or download. Before you test the system, access the
DSDC Status tool in the XLS1000-SDU. Do not test the system if
the status LEDs indicate anything pending or in progress. This
includes:
•Mapping
• Device new starts
• Resets
•Restarts
In the XLS1000-SDU (Rev 2.0), you can test the system while
the Device Supervision LED is on. The Device Supervision LED
may be on longer for larger loops.

Honeywell XLS-REL Specifications

General

Brand	Honeywell
Model	XLS-REL
Category	Control Unit
Language	English