HP 100B SFF User Manual

31
System Board Drive Connections
Refer to the following illustrations and tables to identify the system board drive connectors.
Figure 5-6 System Board Drive Connections –100B SFF PC
Table 6-6 System Board Drive Connections –100B SFF PC
No. System Board Connector System Board Label Color
1 SATA1 SATA1 dark blue
2 SATA2 SATA2 white
5 Media Card Reader F_USB2 white
Removing the Optical Drive
CAUTION: All removable media should be taken out of a drive before removing the drive from the
computer.
To remove the optical drive:
1. Prepare the computer for disassembly (Preparation for Disassembly on page 22).
2. Remove the access panel (Access Panel on page 23).
3. Remove the front bezel (Front Bezel on page 24).
4. Disconnect the power cable (1), data cable (2), from the rear of the optical drive.

HP 100B SFF Specifications

Operating Environment

operating temperature range	10° to 35°C
nonoperating temperature range	-30° to 60°C
operating relative humidity	10-90%
nonoperating relative humidity	5-95%
operating maximum altitude	3048 m
nonoperating maximum altitude	9144 m

Power

operating voltage range	90-137Vac
rated voltage range	100-127Vac
rated line frequency	50-60Hz
power output	65 W
rated input current	1.6A @ 90 VAC

Weight and Dimensions

height	27 cm
width	10 cm
depth	34.79 cm
weight	4.8 kg