EasyManuals Logo
Home>HP>Desktop>100B SFF

HP 100B SFF User Manual

HP 100B SFF
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
37
Battery
The battery that comes with your computer provides power to the real-time clock and has a lifetime of
about three years. When replacing the battery, use a battery equivalent to the battery originally
installed on the computer. The computer comes with a 3-volt lithium coin cell battery.
NOTE: The lifetime of the lithium battery can be extended by plugging the computer into a live AC
wall socket. The lithium battery is only used when the computer is NOT connected to AC power.
WARNING! This computer contains an internal lithium manganese dioxide battery. There is a risk of
fire and burns if the battery is not handled properly. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 14F (60°C).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace the battery only with the HP spare designated for this product.
CAUTION: Before replacing the battery, it is important to back up the computer CMOS settings.
When the battery is removed or replaced, the CMOS settings will be cleared.
NOTE: HP encourages customers to recycle used electronic hardware, HP original print cartridges,
and rechargeable batteries. For more information about recycling programs, go to
http://www.hp.com/recycle.
CAUTION: Static electricity can damage the electronic components of the computer or optional
equipment. Before beginning these procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object.
1. Prepare the computer for disassembly (Preparation for Disassembly on page 22).
2. Remove the access panel (Access Panel on page 23).
NOTE: It may be necessary to remove an expansion card to gain access to the battery.
3. Locate the battery and battery holder on the system board.
4. Depending on the type of battery holder on your system board, complete the following instructions
to replace the battery:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 100B SFF and is the answer not in the manual?

HP 100B SFF Specifications

Operating Environment IconOperating Environment
operating temperature range10° to 35°C
nonoperating temperature range-30° to 60°C
operating relative humidity10-90%
nonoperating relative humidity5-95%
operating maximum altitude3048 m
nonoperating maximum altitude9144 m
Power IconPower
operating voltage range90-137Vac
rated voltage range100-127Vac
rated line frequency50-60Hz
power output65 W
rated input current1.6A @ 90 VAC
Weight and Dimensions IconWeight and Dimensions
height27 cm
width10 cm
depth34.79 cm
weight4.8 kg

Related product manuals