EasyManuals Logo
Home>HP>Desktop>100B SFF

HP 100B SFF User Manual

HP 100B SFF
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
1
1 Installing and Customizing the
Software
If your computer was not shipped with a Microsoft operating system, some portions of this
documentation do not apply. Additional information is available in online help after you install the
operating system.
NOTE: If the computer was shipped with Windows 7 loaded, you will be
prompted to register the computer with HP Total Care before installing the operating system. You will
see a brief movie followed by an online registration form. Fill out the form, click the Begin button, and
follow the instructions on the screen.
CAUTION: Do not add optional hardware or third-party devices to the computer until the operating
system is successfully installed. Doing so may cause errors and prevent the operating system from
installing properly.
NOTE: Be sure there is a 10.2-cm (4-inch) clearance at the back of the unit and above the monitor to
permit the required airflow.
Installing the Operating System
The first time you turn on the computer, the operating system is installed automatically. This process
takes about 5 to 10 minutes, depending on which operating system is being installed. Carefully read
and follow the instructions on the screen to complete the installation.
CAUTION: Once the automatic installation has begun, DO NOT TURN OFF THE COMPUTER UNTIL
THE PROCESS IS COMPLETE. Turning off the computer during the installation process may damage
thesoftware that runs the computer or prevent its proper installation.
NOTE: If the computer shipped with more than one operating system language on the hard drive, the
installation process could take up to 60 minutes.
If your computer was not shipped with a Microsoft operating system, some portions of this
documentation do not apply. Additional information is available in online help after you install the
operating system.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 100B SFF and is the answer not in the manual?

HP 100B SFF Specifications

Operating Environment IconOperating Environment
operating temperature range10° to 35°C
nonoperating temperature range-30° to 60°C
operating relative humidity10-90%
nonoperating relative humidity5-95%
operating maximum altitude3048 m
nonoperating maximum altitude9144 m
Power IconPower
operating voltage range90-137Vac
rated voltage range100-127Vac
rated line frequency50-60Hz
power output65 W
rated input current1.6A @ 90 VAC
Weight and Dimensions IconWeight and Dimensions
height27 cm
width10 cm
depth34.79 cm
weight4.8 kg

Related product manuals