HP 16z-ad000 Maintenance And Service Guide

4. If the WLAN antenna is not connected to the terminal on the WLAN module, install a
protective sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse this procedure.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-6
Speaker description and part number
Description Spare part number
Speakers (includes cushion and sponge) N15680-001
Before removing thespeakers, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the bottom cover (see Bottom cover on page 41).
3. Disconnect the battery cable from the system board (see Battery on page 43).
Remove the speakers:
52 Chapter 5Removal and replacement procedures for authorized service provider parts

HP 16z-ad000 Specifications

General

Brand	HP
Model	16z-ad000
Category	Laptop
Language	English