HP 3314A Operating Manual

DATA ENTRY (cant)
Offset Range
The 3314A's DC Offset can be set from -5V to +5V in 2 offset ranges. To assert
Range Hold
from the front panel, press the OFFSET key and then the BLUE shifted
DOWN ARROW key. To assert Range Hold
from the HP-IB, send "OFRHx" where
x is
the Range Number. Note that the offset will change when Range Hold is
asserted
from the HP-IB if the current entry is outside the normal limits of the
selected range. Pressing the OFFSET key and then the BLUE shifted DOWN
ARROW key or
,.OFRHO" via the HP-IB removes the Range Hold function .
Ra-. ..... WIttI
..... 1IaWI_ ..... ...... Rnp Hlid
1 ± 1.997Y .OOOY .002V .ooov
2 ± 6.00V 2.00Y .OlV .OOV
Symmetry
Variable symmetry is not allowed in frequencv range 8 and conversely, frequen-
cies
2: 2MHz can only be programmed when SYM equals 50% and the SYM light
is
off. "EO 1" will be displayed when these two parameters are in conflict.
53

HP 3314A Specifications

General

Brand	HP
Model	3314A
Category	Portable Generator
Language	English