HP 8642A Operation And Calibration Manual

Operation Model 8642A/B
Amplitude Sweep (cont'd)
Related
Operating
Instructions
3-94
122. Linear Amplitude Sweep. This special function selects a linearly stepped
output rather than the usual logarithmicly stepped output. Use a sweep time greater
than 900 ms to obtain maximum sweep resolution.
222.
Logarithmic Amplitude Sweep. This special function selects the usual
logarithmicly stepped output disabled with Special Function 122.
Refer to Knob (page 3 - 14 I) and Step, Increment Set (page 3-149) for information on
using these
to modify settings
Refer to Instrument Preset, Partial Preset (page 3-139) for information on setting the
instrumen t to an ini tializ.ed state that maintains preset references including the
selected amplitude units.
Refer to Operating Messages (page 3-177) if the instrument displays a message you
want clarifled.
Refer to Special Functions (page 3-165) for information about the way these are
accessed.

HP 8642A Specifications

General

Brand	HP
Model	8642A
Category	Inverter
Language	English