HP 8642A Operation And Calibration Manual

Adjustments Model 8642A/B
5-8
Interpreting Cal Data Stats
When viewing the HP 8642 Cal Data Stats you will see the Module ID Number (refer to Table
5-4), the word STAT, and three pieces of data. The first field to the right of STAT is the Cal Method
Number. If the number is 8999, or below the Cal Data was generated at the factory. If the Cal Method
Number is 9000 or greater, the Cal Data was generated using one of the Auto-Adjust Routines built
into the HP 8642. The second tield to the right of STAT is the date that the Cal Data was generated.
The date is shown in the form month, date, year (MM.DD.YY). The right most field is the five digit
Cal
ID Number which will conform to the last five digits of the serial-number-Iike designator (i.e.
2412A/3l458) that is on each module.
The following are some examples of the Stats Display on the HP 8642:
109 STAT 9995 02.30.84 314581
A2 Cal
Data Stats are: Data generated lIsing the built-in A2 Auto .. Adjust Routine Febnl-
ary 30, 1984 and the A2 module Cal ID Number is 31458.
102 STAT 0002 12.25.86 009031
AI2 Cal Data Stats are: Data generated at the factory OIl December 25, 1986 and the Al2
module Cal 10 Number is 00903.
104 STAT 0001 09.06.82 230101
AI3 Cal Data Stats are: Data generated at the factory on on September 6, 1982 and the AI3
module Cal ID Number is 23010.

HP 8642A Specifications

General

Brand	HP
Model	8642A
Category	Inverter
Language	English