HP 8642A Operation And Calibration Manual

Model 8642A/B Operation
Overview
..
DATA OUTPUT
The Signal Generator can send thE' following data messages when it is addressed to talk:
Status Byte (refer to Status Byte on page 3-29)
Messages (discussed below)
Display Information (disl <Issed be low'
Service Messages (refer to Section ,lll I the Service Manual for specific Service Message
information)
The Signal Generator can output the following messages and display information
(normally viewed on the front-panel display) using HP-lB codes that do not have
equivalent front -panel k. ... ys. j he HP-IB codes are in parenthesis after each message listed
below:
Output Messages
Hardware Errors (OH)
Execution Errors (OE)
Parameters Changed Messages (OC)
Output Active Function (OA)
Output HI, J 0 Status (OL)
Output Display (Output Display is the default HP-IB output when nothing else is
configured for data output; it does not require an HP-IB code to
output data.)
3-15

HP 8642A Specifications

General

Brand	HP
Model	8642A
Category	Inverter
Language	English