Commands
3.66 show time
Shows the common base time and the delta time. This command shows the common base time
that is shared by all microprocessors. The primary MBM provides the base time. This command
also shows the time specific to each partition. If delta times are not set, the Default_SP of the
Default_HP displays -1 for each delta time field.
Syntax
show time
Arguments
None
Options
None
Example
Show the common base time and delta times of all
subpartitions.
MBM> sh time
Common base time: 2002/04/17 10:59:07
HP Name SP Name Delta Time (Days hh:mm:ss)
hp0 Default_SP +00 +00:+00:+00
hp1 Default_SP -01 -01:-01:-01
MBM>
See Also
set time
3-113
To Next Page
Loading...
Need help?
General