Commands
3.49 set time
Sets the common base time. By default, this command sends the current base time to the primary
CPU’s MBM, which then sends out a time synchronizer message to all MBMs and PBMs to get
this new base time. This command enables the user to set up both date and time or just one of
them.
You can use show time to confirm your changes.
Warning: Changing the base time will affect the time on all existing partitions.
Syntax
set time
<date> | <time>
Arguments
date The format is yyyy/mm/dd.
time The format is hh:mm:ss.
Options
None
Examples
1. Change the date and time.
MBM> set time 2002/04/16 17:20:30
MBM> show time
Common base time: 2002/04/16 17:20:34
HP Name SP Name Delta Time (Days hh:mm:ss)
hp0 Default_SP +00 +00:+00:+00
hp1 Default_SP -01 -01:-01:-01
MBM>
2. Change the time only.
MBM> set time 14:45:00
MBM>
3. Change the date only.
MBM> set time 2003/08/16
MBM>
See Also
show time
3-75
To Next Page
Loading...
Need help?
General