To Next Page

To Previous Page

Docking and Undocking the Tablet PC

Reference Guide 2–9

Docking in the Landscape Position

Before you begin, place the Docking Station and the docking

stand on a firm, flat surface.

To dock the tablet PC in the landscape position:

1. Align the docking alignment slots on the lower edge of the

tablet PC with the alignment brackets on the docking stand.

Then, while supporting the back of the docking stand with

one hand, slide the tablet PC into the docking stand until the

lower edge of the tablet PC (shown on the right-hand side of

the illustration below) is firmly seated.

To prevent misdocking:

■

Slide

the tablet PC

into

the docking stand; do not

push

the tablet PC

against

the docking stand.

■ Slide the 2 alignment slots on the tablet PC onto the

2 alignment brackets on the docking stand simultaneously

and with equal pressure.

■ The non-skid rubber pads on the bottom edge of the

docking stand should rest against a firm, flat surface, such

as a desk.

Seating the lower edge of the tablet PC in the docking stand in the

landscape position

HP Compaq tc1100 Reference Guide

Other manuals for HP Compaq tc1100