HP HPE Apollo 2000 Gen10 Plus User Manual

To replace the component, reverse the removal procedure.
Removing and replacing a drive blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the system unless all bays are
populated with either a component or a blank.
Remove the drive blank.
To replace the drive blank, while pressing the release latch, slide the component into the bay until it is fully seated.
Removal and replacement procedures
37

HP HPE Apollo 2000 Gen10 Plus Specifications

General

Brand	HP
Model	HPE Apollo 2000 Gen10 Plus
Category	Measuring Instruments
Language	English