HP HPE Apollo 2000 Gen10 Plus User Manual

b. Move the system interconnect post away from the server bay (callout 1).
c. Release the node signal cables from the triangular bracket (callout 2).
To replace the component, reverse the removal procedure.
Removing and replacing the energy pack
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1. Power down the servers.
2. Remove all power:
Removal and replacement procedures
52

HP HPE Apollo 2000 Gen10 Plus Specifications

General

Brand	HP
Model	HPE Apollo 2000 Gen10 Plus
Category	Measuring Instruments
Language	English