HP Integrity BL860c i2 Installation Guide

2. Remove the mini-divider or divider:
• c3000 mini-divider:
Push the divider toward the back of the enclosure until the divider drops out of the
enclosure.
• c3000 divider
a. Push the divider toward the back of the enclosure until it stops.
b. Slide the divider to the left to disengage the tabs from the wall.
c. Rotate the divider clockwise.
d. Remove the divider from the enclosure.
Installing interconnect modules
For specific steps to install interconnect modules, see the documentation that ships with the
interconnect module.
Installing and powering on the server blade 35

HP Integrity BL860c i2 Specifications

General

Brand	HP
Model	Integrity BL860c i2
Category	Server
Language	English