Connecting a country-specific modem cable adapter
Telephone jacks vary by country. To use the modem and the modem cable outside the country in
which you purchased the computer, you must obtain a country-specific modem cable adapter.
To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack:
1. Plug the modem cable into the modem jack (1) on the computer.
2. Plug the modem cable into the country-specific modem cable adapter (2).
3. Plug the country-specific modem cable adapter (3) into the telephone wall jack.
Selecting a location setting
Viewing the current country selection
To view the current country setting for the modem:
1. Select Start > Control Panel.
2. Click Date, Time, Language, and Regional Options.
3. Click Regional & Language Options.
4. Under Location, view your present location.
ENWW Modem 125
To Next Page
Loading...
Need help?
General