HP ProDesk 400 G2 Small Form Factor User Manual

Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the security
screw:
1. Prepare the computer for disassembly (
Preparation for disassembly on page 19).
2. Remove the access panel (
Access panel on page 20).
3. Remove one of the five silver 6-32 standard screws located on top of the drive cage.
4. Install the security screw through the middle front bezel release tab to secure the front bezel in place.
22 Chapter 4 Removal and replacement procedures: Small Form Factor

HP ProDesk 400 G2 Small Form Factor Specifications

General

Brand	HP
Model	ProDesk 400 G2 Small Form Factor
Category	Desktop
Language	English