EasyManuals Logo

HP ProDesk 600 G1 Tower User Manual

HP ProDesk 600 G1 Tower
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #69 background imageLoading...
Page #69 background image
Installing a slim optical drive
1. Prepare the computer for disassembly (Preparation for disassembly on page 36).
2. Remove the access panel (
Access panel on page 37).
3. Remove the front bezel (
Front bezel on page 39). If you are installing a drive in a bay covered by
a bezel blank, remove the bezel blank. See
System board connections on page 49 for more
information.
4. Before the new optical drive can be used, the release latch must be attached.
a. Peel the backing off the adhesive on the release latch.
b. Without allowing the release latch to touch the optical drive, carefully align the holes on the
release latch with the pins on the side of the optical drive. Make sure the release latch is
oriented properly.
c. Insert the pin at the front of the optical drive into the hole at the end of the release latch, and
press firmly.
d. Insert the second pin, and press the entire release latch firmly to fasten the latch securely to
the optical drive.
Drives
59

Table of Contents

Other manuals for HP ProDesk 600 G1 Tower

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProDesk 600 G1 Tower and is the answer not in the manual?

HP ProDesk 600 G1 Tower Specifications

General IconGeneral
Tcase72 °C
Bus typeDMI2
SteppingC0
FSB ParityNo
Processor cache3 MB
Processor cores2
Processor modeli3-4130
System bus rate5 GT/s
Processor familyIntel® Core™ i3
Processor seriesIntel Core i3-4100 Desktop series
Processor socketLGA 1150 (Socket H3)
Processor threads4
Processor codenameHaswell
Number of QPI links0
Processor frequency3.4 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version3.0
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurations1x8, 1x16, 2x4, 2x8
Thermal Design Power (TDP)65, 54 W
Number of processors installed1
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-1333/1600, DDR3L-1333/1600 @ 1.5V
Memory clock speeds supported by processor1333, 1600 MHz
Memory bandwidth supported by processor (max)25.6 GB/s
Maximum internal memory supported by processor32 GB
Memory slots4x DIMM
Internal memory4 GB
Memory channelsDual-channel
Memory clock speed1600 MHz
Internal memory typeDDR3-SDRAM
Memory layout (slots x size)1 x 4 GB
HDD speed7200 RPM
HDD interfaceSATA
Storage mediaHDD
Optical drive typeDVD Super Multi
Total storage capacity500 GB
Intel segment taggingEnterprise, Small Business
On-board graphics card ID0x41E
Discrete graphics card modelNot available
On-board graphics card modelIntel® HD Graphics 4400
On-board graphics card familyIntel® HD Graphics
Maximum on-board graphics card memory1.74 GB
On-board graphics card base frequency350 MHz
On-board graphics card DirectX version11.1
On-board graphics card dynamic frequency (max)1150 MHz
Number of displays supported (on-board graphics)3
Recovery operating systemWindows 8 Pro
Operating system installedWindows 7 Professional
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
USB 2.0 ports quantity6
Chassis typeMicro Tower
Product colorBlack
Country of originChina
Audio systemHD
Product typePC
Motherboard chipsetIntel® Q85
Scalability1S
Processor ARK ID77480
Processor package size37.5 x 37.5 mm
Supported instruction setsAVX 2.0
Thermal solution specificationPCG 2013C
Intel Small Business Advantage (SBA) version1.00
Intel® Small Business Advantage (Intel® SBA)-
Intel Stable Image Platform Program (SIPP) version0.00
Power supply320 W
Operating temperature (T-T)10 - 35 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth442 mm
Width170 mm
Height399 mm
Weight9300 g

Related product manuals