EasyManuals Logo
Home>HP>Desktop>ProOne 600

HP ProOne 600 User Manual

HP ProOne 600
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Wipe the screen with a soft, clean antistatic cloth. For more difficult cleaning situations, use a
50/50 mix of water and Isopropyl alcohol. Spray the cleaner onto a cloth and use the damp
cloth to gently wipe the screen surface. Never spray the cleaner directly on the screen
surface. It may run behind the bezel and damage the electronics.
Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other
foreign matter can block the vents and limit the airflow.
Optical disc drive precautions
Be sure to observe the following guidelines while operating or cleaning the optical disc drive.
Do not move the drive during operation. This may cause it to malfunction during reading.
Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the
unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you
turn off the power. If you operate the unit immediately, it may malfunction while reading.
Avoid placing the drive in a location that is subject to high humidity, extreme temperatures,
mechanical vibration, or direct sunlight.
CAUTION: If any object or liquid falls into the drive, immediately unplug the computer and have it
checked by an authorized HP service provider.
Shipping preparation
Follow these suggestions when preparing to ship the computer:
1. Back up the hard disc drive files on optical media or external USB drives. Be sure that the backup
media is not exposed to electrical or magnetic impulses while stored or in transit.
NOTE: The hard disc drive locks automatically when the system power is turned off.
2. Remove and store all removable media.
3. Turn off the computer and external devices.
4. Disconnect the power cord from the electrical outlet, then from the computer.
5. Disconnect the system components and external devices from their power sources, then from the
computer.
NOTE: Be sure that all boards are seated properly and secured in the board slots before
shipping the computer.
6. Pack the system components and external devices in their original packing boxes or similar
packaging with sufficient packing material to protect them.
Optical disc drive precautions
51

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProOne 600 and is the answer not in the manual?

HP ProOne 600 Specifications

General IconGeneral
BrandHP
ModelProOne 600
CategoryDesktop
LanguageEnglish

Related product manuals