xx Fabric OS Troubleshooting and Diagnostics Guide
53-1002150-02
• Brocade 300, 5100, and 5300 — On the switch ID pull-out tab located on the bottom of the
port side of the switch.
• Brocade 6510 — On the switch ID pull-out tab located inside the chassis on the port side
on the left.
• Brocade 7800 and 8000 — On the bottom of the chassis.
• Brocade DCX Backbone — On the bottom right on the port side of the chassis.
• Brocade DCX-4S Backbone — On the bottom right on the port side of the chassis.
• Brocade DCX 8510-4 — On the nonport side of the chassis, on the left just below the left
power supply.
• Brocade DCX 8510-8 — On the bottom right on the port side of the chassis and directly
above the cable management comb.
3. World Wide Name (WWN)
Use the licenseIdShow command to display the chassis’ WWN.
If you cannot use the licenseIdShow command because the switch is inoperable, you can get
the WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate at
the top of the nonport side of the chassis.
Document feedback
Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and
completeness of this document. However, if you find an error or an omission, or you think that a
topic needs further development, we want to hear from you. Forward your feedback to:
documentation@brocade.com
Provide the title and version number of the document and as much detail as possible about your
comment, including the topic heading and page number and your suggestions for improvement.
To Next Page
Loading...
Need help?
General