HP SN3000B Troubleshooting Guide

42 Fabric OS Troubleshooting and Diagnostics Guide
53-1002150-02
Port mirroring
3
Maximum mirror connections
Table 9 shows the maximum number of mirror connections you can add to a mirror port.
Configuring a port to be a mirror port
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the portCfg mirrorport [slot number/]<port number>
--enable command.
NOTE
The enable command enables the port as a mirror port. The disable command disables the mirror
port configuration.
Adding a port mirror connection
1. Connect to the switch and log in using an account with admin permissions.
2. Enter the portMirror
--add slotnumber/portnumber SourceID DestID command.
TABLE 9 Maximum number of mirror connections
Model Maximum Number of Mirror Connections
(chassis-wide)
Brocade 300 1
Brocade 5100 3
Brocade 5300 1
Brocade 5410 1
Brocade 5450 1
Brocade 5460 1
Brocade 5470 1
Brocade 5480 1
Brocade 7800 1
Brocade DCX 3
Brocade DCX-4S 3
Brocade Encryption Switch 3
Brocade M5424 1
Brocade VA-40FC 3
FC10-6 3
FC8-16/32/48/64 3
FR4-18i 3
FS8-18 3
FX8-24 3

HP SN3000B Specifications

General

Brand	HP
Model	SN3000B
Category	Switch
Language	English