HP TOUCHSMART 9100 Maintenance And Service Guide

Table 5-4 Computer Setup—Power (continued)
After AC Power
Failure
Allows you to select system restart behavior after power loss:
●
Stay Off
●
Power On
●
Auto
XD (Execute Disable) Disables/enables the processor's XD feature.
Virtualization
Technology
Allows you to disable/enable Virtualization Technology.
S5 Maximum Power
Savings
Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this
system as much as possible in the S5 state. This feature must be disabled if you want to enable
Wake on LAN from S5.
WOL in S5 Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
order to enable limited Wake on LAN from S5.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-5 Computer Setup—Boot
Option Description
Boot-time Diagnostic
Screen
Disables/enables POST diagnostic messages display.
Esc: Boot Menu Disables/enables POST Esc: Boot Menu message display,
F9: Diagnostics Disables/enables POST F9: Diagnostics message display,
F10: Setup Disables/enables POST F10: Setup message display,
F11: Recovery Disables/enables POST F11: Recovery message display,
F12: Boot From LAN Disables/enables POST F12: Boot From LAN message display,
(Boot Device
Priority)
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
CD-ROM Group
●
HDD Group
●
Floppy Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Floppy Group Boot
Priority
Specifies boot device priority within removable devices.
54 Chapter 5 Computer Setup (F10) Utility

HP TOUCHSMART 9100 Specifications

General

Processor cache	2 MB
Processor cores	2
Processor family	Intel® Core™2 Duo
Processor frequency	2.1 GHz
Processor cache type	L3
Processor manufacturer	Intel
Processor front side bus	800 MHz
Chassis type	All-in-One
Display included	Yes
Cabling technology	10/100/1000Base-T(X)
Networking features	Gigabit Ethernet
Graphics card family	NVIDIA
Floppy drive installed	No
Parallel ports quantity	0
Maximum graphics card memory	- MB
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Number of processors installed	1
Internal memory	4 GB
Memory clock speed	1333 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	- GB
HDD interface	SATA
Optical drive type	DVD Super Multi
Discrete graphics card model	NVIDIA GeForce 200
Operating system installed	Windows 7 Professional
USB 2.0 ports quantity	5
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	Black
Country of origin	China

Weight and Dimensions

Depth (with stand)	72 mm
Width (with stand)	579 mm
Height (with stand)	447 mm
Weight (with stand)	11500 g