HP xw9400 User Manual

Computer Setup (F10) Utility
The Computer Setup Utility enables you to:
●
Change current settings from the factory default settings.
●
Modify or restore factory default settings.
●
Determine if all of the devices installed on the workstation are recognized by the system and
functioning properly.
●
Determine information about the operating environment of the workstation.
●
Solve system configuration errors detected but not automatically fixed during the Power-On Self-
Test (POST).
●
Establish and manage security features and password prompting during system reset and during
power-on.
●
Establish and manage energy-saving time-outs (not supported for Linux platforms).
●
Set the system date and time.
●
Set, view, and change the system configuration, including settings for processor, graphics,
memory, audio, storage, communications, and input devices.
●
Modify the boot order of installed mass storage devices such as hard drives, diskette drives, optical
drives, and network drives.
●
Enable or disable Network Server Mode, which enables the workstation to boot the operating
system when the power-on password is enabled with or without a keyboard or mouse attached.
When attached to the system, the keyboard and mouse remain locked until the power-on password
is entered.
●
Enable/disable POST Messages to change the display status of POST messages. POST
messages disabled suppresses most POST messages, such as memory count, product name, and
other non-error text messages. If a POST error occurs, the error is displayed regardless of the
mode selected. To temporarily switch to POST messages enabled, press any key (except F1
through F12) during POST.
●
Establish an Ownership Tag, the text of which is displayed each time the system is turned on or
restarted.
●
Enter the Asset Tag or property identification number assigned by your company to this
workstation.
●
Secure the integrated I/O functionality, including the serial and USB ports, audio, embedded NIC,
SAS, or IEEE 1394 so that the I/O functionality cannot be used until they are unsecured.
●
Enable or disable removable media boot ability.
●
Enable or disable removable media write ability (when supported by hardware). Used commonly
for legacy diskettes.
●
Replicate your system setup by saving system configuration information onto diskette or USB, or
restoring it onto one or more workstations.
24 Chapter 3 System management ENWW

HP xw9400 Specifications

General

Brand	HP
Model	xw9400
Category	Desktop
Language	English