The Computer Setup (F10) Utility menu
The following table describes the functions available in the Computer Setup (F10) utility menu.
NOTE: With new BIOS releases, the following content is subject to change, so the menu might be
different than shown.
Table 4-1 Computer Setup (F10) Utility menu descriptions
Heading Option Description
File System
Information
Displays the following system characteristics:
●
Product Name
●
SKU Number
●
Processor Type
●
Processor Speed
●
Processor Stepping (stepping designation and patch number)
●
Cache Size (L1/L2/L3)
●
Memory Size
●
Integrated MAC (onboard NIC)
●
System BIOS
●
Chassis Serial Number
●
Asset Tracking Number
●
ME (Intel Management Engine) Firmware Version
●
ME Management Mode
About Displays copyright information.
Set Time and
Date
Lets you set system time and date. Use the keyboard Tab and arrow keys to make changes.
Flash System
ROM
Lets you upgrade the BIOS from a ROM image on optical media or USB.
Replicated Setup Provides these options:
●
Save to Removable Media—Saves the computer configuration, including CMOS, to a
USB storage device. The saved configuration file is named cpqsetup.txt.
●
Restore from Removable Media—Restores the computer configuration from a USB
storage device.
Default Setup Provides these options:
●
Save Current Settings as Default—Saves the current settings as default settings for the
next operation.
●
Restore Factory Settings as Default—Restores the factory settings as the default settings
for the next operation.
Apply Defaults
and Exit
Restores the default settings defined in Default Setup.
28 Chapter 4 System management ENWW