●
Never restrict the incoming or outgoing airow of the workstation by blocking any vents or air intakes,
as shown in the following gure.
Setup procedures
WARNING! To reduce the risk of electric shock or damage to your equipment, observe these practices:
• Plug the power cord into an AC outlet that is easily accessible.
• Disconnect power from the workstation by unplugging the power cord from the AC outlet (not by unplugging
the power cord from the workstation).
• Plug the cord into a grounded (earthed) three-pin outlet. Do not disable the power cord grounding pin (for
example, by attaching a two-pin adapter). The grounding pin is an important safety feature.
To set up the workstation:
1. Connect the power cord ❶ to the workstation.
2. Connect the mouse and keyboard ❷ to the workstation.
3. Connect the monitor ❸ to the workstation.
4. Connect other peripheral components (such as a printer) according to the instructions included with the
device.
5. Connect a network cable to the workstation and to a network router or LAN device.
6. Plug the workstation power cord and monitor power cord ❹ into an AC outlet (4).
Setup procedures 9
To Next Page
Loading...
Need help?
General
