Huawei Technologies Proprietary
16
Click Submit to confirm the configuration.
Click Cancel to quit configuration without saving the
changes.
IV. Save
Click Submit to save the settings in the RAM.
To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
3.2.5 LAN
Click LAN of Basic in the navigation bar to display the LAN
Settings page.
I. Configuration
Make sure that the IP address of LAN and the local PCs are in the
same subnet.
Table 3-6 shows the parameter explanation of the LAN Settings
page.
Table 3-6 Parameters in the LAN Settings page
Item Configuration
IP Address
Enter the IP address of Ethernet interface.
Subnet Mask
Select an appropriate subnet mask from the
drop-down menu.
To Next Page
Loading...
Need help?
General