Huawei Technologies Proprietary
31
I. Configuration
Enable UPnP to allow the device that supports UPnP to join in
network dynamically, obtain IP address, transmit performance, find
other devices and learn performance. If DHCP and DNS services are
available on network, device can also use them. UPnP permit device
to be off-line automatically without any ill effects on the device itself or
in network.
Check the box of Enable UPnP to enable UPnP or uncheck the
box to disable it.
II. Save
Click Apply to save the settings in the RAM.
To save this configuration changes permanently, enter the
Save & Reboot page, select Save and click Apply to save
new settings.
3.3.2 RIP
Click RIP of Advanced in the navigation bar to display the RIP
page.
I. Configuration
You can view the related information of RIP in this page including
Interface, RIP Version, Operation Mode, and Enabled.
To change RIP configuration on an interface, click the
corresponding icon
in the Edit column to display the RIP-edit page.
To Next Page
Loading...
Need help?
General