4.5 Moving the SUN2000
Step 1 Take the SUN2000 out of the packing case and move it to the installation position.
● After placing the equipment in the installation position, unpack it with care to
prevent scratches. Keep the equipment stable during unpacking.
● Handles are packed in a
tting bag and are not delivered with the SUN2000.
● Four persons or appropriate transportation tools are required to move the
SUN2000.
● Do not use the ports or wiring terminals at the bottom to support any weight
of the SUN2000.
● When you need to temporally place the SUN2000 on the ground, use foam,
cardboard, or other protection material to prevent damage to its enclosure.
Figure 4-11 Moving the SUN2000
If the installation position is high, you can hoist the SUN2000.
SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual 4 Installation
Issue 07 (2023-06-30) Copyright © Huawei Technologies Co., Ltd. 37
To Next Page
Loading...
Need help?
General