8.4 Replacing a Fan
● Before replacing a fan, power
o the SUN2000.
● When replacing a fan, use insulated tools and wear PPE.
If the fan gets stuck when being pulled or pushed, slightly lift it.
Step 1 Remove the fan tray.
1. Remove the screws from the fan tray and store them properly.
2. Pull out the fan tray until the fan bae plate is ush with the SUN2000
enclosure.
3. Place down the handle.
4. Unscrew the connectors.
5. Disconnect the cables.
6. Pull out the fan tray.
Figure 8-3 Pulling out the fan tray
Step 2 Remove the cable ties from the faulty fan.
SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual 8 System Maintenance
Issue 07 (2023-06-30) Copyright © Huawei Technologies Co., Ltd. 78
To Next Page
Loading...
Need help?
General