8.1 Adjusting Video Display Effects
You can adjust the video display effects by modifying the settings for the picture offset, sampling
phase, and other picture parameters.
8.1.1 Adjusting the Picture Offset
If the displayed video deviates from its normal position, adjust the picture offset.
Background
A picture offset may occur in video input or output, such as the computer desktop, when the
video is displayed on the monitor screen.
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Image Offset.
Step 2 Select VGA IN or VGA OUT.
Step 3 Select Horizontal offset or Vertical offset and move the slider to make adjustments.
----End
8.1.2 Adjusting the Sampling Phase
When the color of a picture displayed on the monitor screen is distorted, adjust the sampling
phase.
Background
Color distortion may occur in video input when the video is displayed on the monitor screen.
That is, the color seen from the computer monitor is different from the color seen from the
monitor connected to your TE30.
Procedure
Step 1 Choose Advanced Settings > Settings > Video > Sampling Phase > VGA IN.
Step 2 Move the slider to adjust the sampling phase.
----End
8.1.3 Setting Video Parameters
On your TE30, you can set its video parameters, including the video mode, noise reduction, and
video resolution. You can view the video result of your settings on the monitor connected to
your endpoint.
Procedure
Choose Advanced Settings > Settings > Video > Video Parameters. Set the video parameters
by referring to Table 8-1.
HUAWEI TE30 Videoconferencing Endpoint
User Guide 8 Video and Audio
Issue 01 (2013-03-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
To Next Page
Loading...
Need help?
General
