8 - English
1. FUNCTION
1.4 Mower program Automower
®
The behaviour of the Husqvarna Automower
®
is
controlled by a microprocessor and software. The
software, the mower program, manages all information
and the operation of the mower.
This Technical Manual for Automower
®
covers edition
2.7x of the mower program.
1.4.1 Find out the version number
This section does not apply to 210 C. See chapter 4.
Autocheck, Service program to find the version for 210
C.
Go to the Quick Check function:
1. Turn
ON
the main switch on the Automower
®
.
2. When the main menu is displayed: Hold down the
0
button for two seconds.
The version (edition and program type) is stated
on the two uppermost rows, for example 0
2.71
and
260 ACX GSM CD.
3. Hold down the
Arrow back
button to return to
the main menu.
It is important that the Automower
®
is programmed
with the correct version of the mower program. The
version consists of both the edition and the program
type. The edition states how new the mower program
is. Husqvarna works constantly to improve the
behaviour and performance of the mower, which
results in new program editions. The program type
provides information about which type of mower
program Automower
®
is programmed with. The control
box fitted on the mower and whether the mower is
equipped with any extra equipment determine which
program type the mower is to be programmed with.
Table 2: Version of the mower program
Control
box from
year
Control
box
version
Version of the mower
program
File name Production/
aftermarket
Edition Program type
2003 28 2.33 m/2003 Ver0233TH.S - / x
2007-2010 36 2.50 m/2003-2005
Ver0250_220XZ.S - / x
2004 29 & 30 2.50 m/2004
Ver0250TE.S - / x
2005 32 2.50 m/2005
Ver0250AE.S - / x
2006 33 2.70 m/2006 Ver0270_220LZ_CD.S - / x
2007-2010 36 2.70 210 C CD Ver0270_210LZ_CD.S x / x
2007-2010 36 2.70 220 AC CD Ver0270_220LZ_CD.S x / x
2010 36 2.70 220 AC GSM CD Ver0270_220LZ_CD_GSM.S - / x
260 ACX GSM CD
Ver: 02.71 B:36 U:00
Date: Nov 26 2009
Chargings OK
Efficiency
Searching
Fault, number
15
98%
5%
4