Utility Garment Sewing
41
Increase the stitch length on the
Reinforced Straight Stitch for impressive
topstitching.
Reinforced Straight Stitch
The reinforced straight stitch is stronger than
ordinary straight stitch, due to the fact that the stitch
is tri ple and elastic. The reinforced straight stitch
can be used for for all heavy fab rics, for crotch
seams that are subject to con sid er a ble strain and for
topstitching in heavy fab rics.
Repair garment seams in stress areas with this stitch.
Fabric: Woven heavy
Touch: Woven heavy fabric in the Sewing Advisor
and Stitch A
108.
Use: Presser foot B and size 80 needle as
recommended. Put the fab ric in position under the
press er foot.
Sew:
• Step on foot control. The Sen sor Foot lowers
automatically. If you need to adjust fabric, touch
Pivot
.
• Stitch 5/8'' (15 mm) from the bias fold edge.
• Touch A107. Touch and increase stitch
length to 4.5. You may use presser foot D and sew
a row of topstitching along the edge of the fold.
• Touch
.
To Next Page
Loading...
Need help?
General
