Decorative Sewing
62
Adjust the Decorative Stitches
By using the Quilt Designer II function buttons or the functions in the
ADJUST menu, you can vary the stitches to À t your speciÀ c project.
When sewing decorative stitches, always use Husqvarna Viking Tear-
a-way stabilizer. Sew the samples below on a piece of fabric, following
the instructions.
Fabric: Broadcloth or chino, Husqvarna Viking Tear-
A-Way stabilizer.
Touch: Woven medium on the Sewing Advisor, and
stitch N
102 on Stitch d-Card N1, Fashion.
Thread with: Embroidery thread on top and
embroidery weight bobbin thread.
Use: Presser foot B as recommended.
Sew:
• Place stabilizer under fabric.
• Sew several stitches.
FIX
• Touch
at the middle of the stitch, the machine
stops sewing and locks the stitches with several
tiny straight stitches.
Stitch Re-start
Touch stitch re-start to begin at the fi rst stitch of the
decorative stitch. If you have altered stitch width,
stitch length or elongation, it will be remembered.
• Touch Stitch Re-start
.
• Stitching begins at the start of the stitch.
STOP
The
button is used to conclude a stitch, i.e. the
machine fastens the thread and stops au to mat i cal ly
when the sewing of the stitch has been completed.
is cancelled when you press the button again or
by selecting a new stitch.
• As you begin stitching the last stitch, touch
to
tie off at the end of the stitch.
To Next Page
Loading...
Need help?
General
