Husqvarna Quilt Designer II User Manual

Decorative Sewing
65
Program Stitches and Letters
To program the stitch combination shown:
• Touch “FUNC” to bring up
• Insert Stitch d-Card E
1,
• Touch stitch E
115. It appears on the Touch Screen
The cursor moves automatically to the next po si tion
ready to receive the next stitch, or to adjust the one
just entered.
Eject Stitch d-Card E
1 and insert Stitch d-Card O1, Block alphabet.
To program “Q” in upper case letters, touch “Q” on
Stitch d-Card O
1. “Q” appears on the screen next to
the stitch.
To program “uilt” in lower case letters, touch in the
lower right corner of the Stitch d-Card. The low er
case submenu is activated (
is vis i ble on the
Touch Screen).
Touch u, the letter appears on the display and the
cursor moves to the next position. Continue to enter
the letters: i, l, and t.
Eject Stitch d-Card O
1 and insert Stitch d-Card E1.
Touch stitch E
115. It appears on the Touch Screen.
• Touch
to mirror image the stitch end to end.
Touch the
function button on the machine
to enter stop to sew only one sequence of your
program.
Touch
function button to add a cut in your
sequence to make your Quilt Designer II cut the
thread when it has fi nished sewing.

Husqvarna Quilt Designer II Specifications

General

Brand	Husqvarna
Model	Quilt Designer II
Category	Sewing Machine
Language	English