132 HyPrecision Predictive waterjet pump Operator Manual 810120
5 – Preventive maintenance
Preventive maintenance
Postmaintenance start procedure
Touch the X symbol to stop the sequence and turn off the pump.
The automatic start procedure is designed to break in the pump after maintenance. A consistent, smooth start
procedure after maintenance can improve high-pressure seal life.
9. Touch the applicable symbol on the screen to record the reason that the part was replaced. This
information is saved as a .CSV file on the SD card.
Inputs and outputs
Touch this symbol to open the screen that shows inputs and outputs for the controller.
Refer to Controller problems on page 175 for detailed description.
Alarm log
Touch this symbol to open the Alarm Log screen.
1
Leak
2
Worn or broken part
3
Scheduled preventive maintenance
To Next Page
Loading...
Need help?
General
