204 HyPrecision Predictive waterjet pump Operator Manual 810120
9 – Installation
Installation
Install the external plumbing package (optional)
The plumbing package is designed to make installing high-pressure tubing from the pump to the cutting table
easier. A whip bracket reduces stress on the tubing and the necessity for 90° bends.
Parts, tools, and materials
1. Find the mounting holes for the plumbing kit on the rear of the pump above the utility panel.
2. Use the mounting holes to install the angle plate on the pump frame.
3. Use the included hardware to mount the high-pressure tubing whip bracket on the angle plate.
4. After the high-pressure tubing is connected to the utility panel, install the high-pressure tubing clamps on the
whip bracket.
HyPrecision P-15/P-30/P-50 pump HyPrecision P-50S/P-60S/P-75S pump
1-15578 Pump-mounted plumbing kit
Set of standard wrenches
To Next Page
Loading...
Need help?
General
