Hypertherm HyPrecision Predictive P-50S User Manual

HyPrecision Predictive waterjet pump Operator Manual 810120 91
5 – Preventive maintenance
Preventive maintenance
Replace the Seal Maintenance Indicator tubes
The inner surfaces of the SMI tubes become dirty over time. Dirty tubes can cause a fluid monitoring sensor error.
Parts, tools, and materials
Do this task when the pump is off.
1. Do steps 1 and 2 on page 90 to remove the tubes.
2. Do steps 5 and 6 on page page 90 to install the new tubes.
Do this every 1,500 hours.
1-17501 Seal Maintenance Indicator tubes
replacement kit, HyPrecision P-15/P-30/P-50
or 
1-17483 Seal Maintenance Indicator tubes
replacement kit, HyPrecision P-50S/P-60S/P-75S

Hypertherm HyPrecision Predictive P-50S Specifications

General

Brand	Hypertherm
Model	HyPrecision Predictive P-50S
Category	Water Pump
Language	English