Hypertherm HyPrecision Predictive P-50S User Manual

HyPrecision Predictive waterjet pump Operator Manual 810120 149
Troubleshooting
Section 7
Troubleshooting
The HyPrecision Predictive pump features technology that helps a user anticipate a high-pressure seal failure.
This adds flexibility to the cutting schedule and prevents unscheduled downtime.
In this section
 Safety
 Normal status
 Alarms
 Warnings
 Faults
 Intensifier problems
 Hydraulic fluid
 Water
 Seal Maintenance Indicator (SMI)
 A warning or a fault occurs during the start sequence
 The pump makes noise during operation
 Controller problems
This section assumes that the user is familiar with the Safety, Operation, and Pump
specifications sections of this manual.
Keep accurate maintenance records. Records can help with predicting and preventing
maintenance problems.
Use the maintenance log feature to record maintenance performed on the pump and the
intensifier. Refer to
Record maintenance on page 129 for instructions.
It is possible that not all of the information in this section applies to all pump models.

Hypertherm HyPrecision Predictive P-50S Specifications

General

Brand	Hypertherm
Model	HyPrecision Predictive P-50S
Category	Water Pump
Language	English