SPECIFICATIONS
3
2-4 powermax1650 Operator Manual
T100 torches
Handheld cutting capacity at 100 amps
Recommended capacity 1-1/4 inch (32 mm) at 19 ipm (482 mm per min)
Maximum capacity 1-1/2 inch (38 mm) at 10 ipm (250 mm per min)
Severance capacity 1-3/4 inch (45 mm) at low speed
Mechanized cutting capacity at 100 amps
Recommended pierce capacity up to 1/2 inch (13 mm)
Maximum pierce capacity 3/4 inch (19 mm)
Severance with an edge start 1-3/4 inch (45 mm) at low speed
Gouging capability
Metal removal rate on mild steel 24 pounds (10.8 kg) / hour
Weight
T100
7.2 pounds (3.3 kg) with 25 ft (7.5 m) lead
13.9 pounds (6.3 kg) with 50 ft (15 m) lead
20.6 pounds (9.4 kg) with 75 ft (22.5 m) lead
T100M-2
8.3 pounds (3.8 kg) with 25 ft (7.5 m) lead
11.0 pounds (5.0 kg) with 35 ft (10.7 m) lead
15.0 pounds (6.8 kg) with 50 ft (15 m) lead
21.7 pounds (9.9 kg) with 75 ft (22.5 m) lead
To Next Page
Loading...
Need help?
General
